欢迎访问本网站,我们是专业的压滤机专用泵生产商
联系方式
  • 电话:0312-3426976
  • 联系人:徐经理
  • 手机:13932271419
  • 业务QQ:632469545
  • 地址:河北安国市石佛镇路景工业园区景旺路8号

轴承体的装置过程都有哪些?

date.png 2019-12-04 08:49:04

这里我们来理解一下我们的轴承体的装置过程都有哪些?我们如何来实行轴承体的装置工作的:

1、轴承体的组成

轴承体组件包括:轴、轴承体、轴承、挡圈、轴承压盖、迷宫轴套、轴承隔环、圆螺母、平键、拆卸环等组成

2、轴承体的组装

①组装前,各零部件要清洗(去毛刺、铁屑)

②将轴竖立(驱动端向下),装入挡圈Ⅰ,将脱套轴承内圈用轴承加热器加热后装在轴上,冷却至室温。

③将轴反向竖立,装入挡圈Ⅱ,将角接触轴承加热装在轴上,分别放入轴承隔环Ⅰ、 Ⅱ。再将另一个角接触轴承加热装在轴上(两件轴承按面对面放置)。

④将轴承体竖立(深口向上),将轴自上而下装入轴承体内,加密封垫,盖上轴承压盖Ⅱ,用螺栓紧固,装入迷宫轴套(平面),背紧圆螺母.

⑤将轴承体反向竖立,装入脱套轴承外圈,加密封垫,盖上轴承压盖Ⅰ(铣槽口对准注油孔),用螺栓紧固,装入迷宫轴套(斜面),装入拆卸环(斜面向下)。

⑥用黄油枪分别从两个注油孔注入3#锂基脂适量,拧上注油杯,装入平键(转动要灵敏)。轴承体组件装置完成。

Now let's understand the installation process of our bearing body? How do we implement the device work of bearing body


1. Composition of bearing body


Bearing body components include: shaft, bearing body, bearing, retaining ring, bearing gland, labyrinth shaft sleeve, bearing spacer ring, round nut, flat key, disassembly ring, etc


2. Assembly of bearing body


① before assembly, all parts shall be cleaned (deburring and scrap iron)


② erect the shaft (drive end down), install the retaining ring I, heat the inner ring of the stripped bearing and install it on the shaft, and cool it to room temperature.


③ erect the shaft reversely, install the retaining ring II, heat the angular contact bearing onto the shaft, and put the bearing spacer rings I and II respectively. Then heat another angular contact bearing and install it on the shaft (two bearings are placed face to face).


④ erect the bearing body (deep mouth upward), install the shaft into the bearing body from top to bottom, add sealing gasket, cover the bearing gland II, fasten with bolts, install the labyrinth shaft sleeve (plane), and back up the round nut


⑤ erect the bearing body in reverse direction, install the outer ring of the stripped bearing, add the sealing gasket, cover the bearing gland I (milling notch is aligned with the oil injection hole), fasten it with bolts, install the labyrinth shaft sleeve (inclined plane), and install the disassembly ring (inclined plane downward).


⑥ use the grease gun to inject 3 × lithium grease from two oil filling holes, screw on the oil filling cup, and install the flat key (sensitive rotation). Assembly of bearing body is completed.


联系方式

ico04
联系人

徐经理

ico01
电话

0312-3426976

ico06
手机

13932271419

ico05
QQ

632469545

ico03
邮箱

632469545@qq.com

ico02
地址

河北安国市石佛镇路景工业园区景旺路8号

 
<
线

商盟客服 >
您好,欢迎莅临我们的网站,欢迎咨询...

  • 徐经理: 点击这里给我发消息